Width x depth: 305 x 230 mm. Cuttable materials: Flat engraving/Cylindrical engraving. Acrylics, aluminum, brass, stainless steel, and glass (1). Cuttable materials: Ring engraving (inner or outer surface) (2). Brass and silver, etc. Loadable workpiece weight (when using the motorized vise jaw). 4.3 kg (including the weight of jig). X, Y, and Z operation strokes. X, Y, and Z: 305 x 230 x 40 mm. Maximum angle of rotation. ° (±5000 rotations) During engraving: ±360°. X-, Y-, Z-, and A-axis drive system. X and Y axes: 0.1 to 60 mm/sec. Z axis: 0.1 to 30 mm/sec. 0.01 mm/step or 0.025 mm/step. X and Y axes: 0.0025 mm/step. Z axis: 0.00125 mm/step. A axis: 0.045°. Brushless DC motor, maximum 50 W. 5,000 to 20,000 rpm. Cutter holder, collet method. Loadable workpiece thickness (When using the flat table). Maximum 80 mm (78 mm when nose unit is used). USB (compliant with Universal Serial Bus Specification Revision 1.1) Serial (RS-232C-compliant). Voltage and frequency: AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC 60664-1) Required power capacity: 1.9 A (100 to 120 V)/0.8 A (220 to 240 V). During operation: 60 dB(A) or less (when not cutting), during standby: 40 dB(A) or less (as specified by ISO 7779). Width x Depth x Height: 755× 639× 675 mm. Operating environment: Temperature of 5 to 40°C, 35 to 80% relative humidity (no condensation) Ambient pollution degree: 3 (as specified by IEC 60664-1). Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), diamond scraper (diameter 4.36 mm), flat table, spare mounting screw (for the cutter holder), wrench, solid collet for diamond scraper (diameter 4.36 mm), solid collet (diameter 4.36 mm), solid collet (diameter 3.175 mm), Cylindrical-engraving adapter, cup cones, face plates, Standard jigs, Pen jigs, water nose attachment, faceplate mounting screws, standard-jig retaining screw, pin jigs, flat-table securing screw, hexagonal screwdriver, hexagonal wrench, handy panel, adhesive sheet, lubricant filter, vacuum adapter for chip cleaning, Dust tray, USB cable, Roland Software Package CD-ROM, Roland EngraveStudio CD-ROM, Roland EngraveStudio Software Guide, and EGX-360 Startup and Maintenance Guide (this document). (1) Cutters or attachments available separately are required. (2) Jigs and cutters available separately are required. The item “Roland EGX-360 Rotary Engraving Machine cylindrical extras diamond” is in sale since Sunday, January 21, 2018. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving”. The seller is “bora.isr” and is located in Ashqelon. This item can be shipped worldwide.
- Brand: Roland
- Model: EGX 360
- Country/Region of Manufacture: Japan