DIY Shirt Equipment 4 Color 1 Station Screen Printing Press Printer. Please Note:Product in good condition with traces of use! This is a 4 color 1 station table type press printer, model NO. It is mainly used for 4 colors T-shirt overprinting. This is a manual registration screen printing equipment, need to be fixed on the table. Screen frame holder could rotary at 360 degree. Each screen frame holder has a locating detent, put it closely in the locating wheel, then can make sure the plate is exactly. According to the weight of the screen frame, spring tension can be adjusted by the screws to achieve balance. 4 Adjust the knobs on the chuck, will clamp the screen frame tightly. 5 Platen is mounted directly on the printer arm with self-tapping screw. 6 Surface of the platen is slightly pitting, more suitable for scraping the pallet glue. 7 This machine is combination structure, suit for express transportation; Attached with whole set installation tools, operator can install the machine refer to the instruction. Idth of the screen frame check: 7.8″ /20cm (max external size 24″/60cm, max thickness 2/ 5.1cm). Screen frame check can be adjusted up & down within 2/5.1cm. T-shirt platen size: 22x18x0.7 inch/ 55x45x1.8cm.